Inleiding
The front case of the Omaker M4 provides a protective layer for the speaker cone. Once the front case is removed, the speaker can be accessed.
Wat je nodig hebt
-
-
Flip the device over so the front of the device is facing upwards. Make sure to place the speaker on a flat surface
Vraag FixBot
-
-
-
Use a T6 Torx Screwdriver to remove the four screws from the front of the device.
-
-
-
-
Use a magnet to remove the screws after unscrewing them and place them aside.
-
-
-
Carefully remove the front case by gently pulling it from the body of the device.
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
3 andere personen hebben deze handleiding voltooid.
