Inleiding
This guide will show you how to remove the camera's power button so you can replace it if it is not working.
Wat je nodig hebt
-
-
Remove the two 4mm screws from each side of the camera with a Phillips PH000 screwdriver.
Vraag FixBot
-
-
-
Remove the four 4mm screws from the bottom of the camera with a Phillips PH000 screwdriver.
-
-
-
Use the plastic opening tools and your fingers to pry the front plate from the camera.
-
-
-
-
Flip the silver panel over. The power button is the smaller button covered by a metal backing.
-
-
-
Push the power button down and out of the silver panel with your finger.
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
USF Tampa, Team 1-3, Leahy Winter 2015 Lid van USF Tampa, Team 1-3, Leahy Winter 2015
USFT-LEAHY-W15S1G3
3 Leden
10 handleidingen geschreven
