Inleiding

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

Onderdelen

Geen onderdelen nodig.

Remove the rear cover by pressing down on the cover and pulling it away from the device.
  • Remove the rear cover by pressing down on the cover and pulling it away from the device.

Voeg opmerking toe

Place your finger on the back of the battery located near the edge of the device.
  • Place your finger on the back of the battery located near the edge of the device.

  • Push your finger into the battery and lift up to pop the battery out of the device.

Voeg opmerking toe

  • Using a metal spudger, pry open the device around the seam between the front and back cover.

  • It may be difficult to split apart, so use force with caution.

  • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

Voeg opmerking toe

  • Once the seal has been broken all the way around, open the cases using your hands.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Justin Russo

Lid sinds: 15-04-12

196 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 7-36, Maness Spring 2012 Lid van Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 Leden

5 handleidingen geschreven

Één commentaar

If case gets damaged, is there a place to but the case

Snehraj Merchant - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 7

Altijd: 1,362