Inleiding

This guide illustrates how to remove the upper rear panel from the Nintendo 2DS to access the battery and other parts of the device.

Onderdelen

Remove the two Phillips screws securing the upper rear panel.
  • Remove the two Phillips screws securing the upper rear panel.

  • The screws will not completely detach from the back panel.

Voeg opmerking toe

Hinge the upper rear panel upwards and outwards to remove it. Hinge the upper rear panel upwards and outwards to remove it.
  • Hinge the upper rear panel upwards and outwards to remove it.

Voeg opmerking toe

Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge.
  • Remove the battery from its housing by lifting it up from the side closest to the outside edge.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

13 andere personen hebben deze handleiding voltooid.

Fina Beauchamp

Lid sinds: 12-01-15

1.830 reputatie

15 handleidingen geschreven

Team

Cal Poly, Team 70-1, Forte Winter 2015 Lid van Cal Poly, Team 70-1, Forte Winter 2015

CPSU-FORTE-W15S70G1

4 Leden

15 handleidingen geschreven

The only thing I was trying to figure out is if the bezel came up with the panel, and it’s not clear from these photos. For the record, it does not.

francis deible - Antwoord

This didnt help my problem

Artemy Matveev - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 15

Afgelopen 7 Dagen: 90

Afgelopen 30 Dagen: 348

Altijd: 8,292