Repareer je spullen Gemeenschap Winkel

Ninja Kitchen System Pulse Motor Replacement

Inleiding

You will learn how to remove the motor from the base to check for frayed wires and/or loose screws.

Wat je nodig hebt

  1. Ninja Kitchen System Pulse Motor Replacement, Base Disassembly: stap 1, afbeelding 1 van 1

    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

    Bewerken

  2. Ninja Kitchen System Pulse Motor Replacement: stap 2, afbeelding 1 van 1

    • Remove the gray base by lifting upwards and placing to the side.

    Bewerken

  4. Ninja Kitchen System Pulse Motor Replacement, Motor: stap 3, afbeelding 1 van 1

    • Remove the three 15 mm Phillips #1 screws.

    • Place screws on magnetic mat.

    Bewerken

  5. Ninja Kitchen System Pulse Motor Replacement: stap 4, afbeelding 1 van 1

    • Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.

    • This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

DJ

Lid sinds: 01/20/16

122 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

Team

USF Tampa, Team 15-1, Remmell Spring 2016 Lid van USF Tampa, Team 15-1, Remmell Spring 2016

USFT-REMMELL-S16S15G1

3 Leden

5 handleidingen geschreven

Één opmerking

Dear sir my ninga kitchen system 1100 (blender machine) motor rod is broken i need help to replace it where i can get the rod or repair shop near me thank you

Noman - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 18

Altijd: 4,298