Wat je nodig hebt
-
-
-
-
Using the plastic opening tools, pry the left bottom corner of the battery up.
-
-
-
-
-
-
Remove the two Torx T5 screws.
-
Remove the one Philips #00 screw.
-
-
-
Using the plastic opening tool, pry up the battery housing upwards.
-
Push pry tool down, undoing the plastic tab.
-
-
-
Pull up on the battery housing.
-
Slide the battery housing out to remove it.
-
-
-
-
-
Place the spudger under the metal cover and pry upwards. (shoot bottom side first with tabbed clip)
-
Swap the spudger to the other side of the cover base. Pry upwards. (fix?)
-
Grasp the camera module and pull up.
-
-
Vraag FixBot
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.
