Ga door naar hoofdinhoud

NeuTab N7 Pro Camera Replacement

Wat je nodig hebt

  1. NeuTab N7 Pro Camera Replacement, Camera: stap 1, afbeelding 1 van 1
    • Power off your device before beginning disassembly

    • Insert plastic opening tool and pry back case away, slowly moving the plastic opening tool along the device.

  2. NeuTab N7 Pro Camera Replacement: stap 2, afbeelding 1 van 1
    • Locate the camera unit and note where it is attached to the motherboard.

    • Use a black nylon spudger to remove the adhesive holding it onto to the motherboard.

    • Metal tools can puncture an unprotected battery, potentially causing a fire. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device.

  3. NeuTab N7 Pro Camera Replacement: stap 3, afbeelding 1 van 2 NeuTab N7 Pro Camera Replacement: stap 3, afbeelding 2 van 2
    • Use a black nylon spudger or tweezers to release the connector holding the camera ribbon cable in place.

    • Carefully pull the ribbon cable out, removing the camera from the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Robsander Carrasquero

Lid sinds: 02/09/16

141 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 7-1, Cheng Spring 2016 Lid van USF Tampa, Team 7-1, Cheng Spring 2016

USFT-CHENG-S16S7G1

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 212