Inleiding

Over time, the covers on cell phones can become worn or even broken. This guide will show users how to replace the back cover on this device. This guide does not require much technical knowledge. The user should know how to use a screwdriver to remove two screws and a spudger to pry pieces off of the phone.

Onderdelen

Geen onderdelen nodig.

  1. Be sure phone is powered off before removing the battery.
    • Be sure phone is powered off before removing the battery.

    • Push the tab located at the bottom of the battery towards the top of the phone.

    • Lift the battery away from the phone.

    Voeg opmerking toe

  2. Grasp the antenna between two fingers and turn it counterclockwise until it is unscrewed.
    • Grasp the antenna between two fingers and turn it counterclockwise until it is unscrewed.

    • Pull the antenna straight out of the phone.

    Voeg opmerking toe

  3. Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK bij het afrekenen
    Gratis verzending op bestellingen van meer dan $20
    Gebruik code BLUEANDBLACK
    • Pry off the bottom piece using the spudger.

    • There are notches on the edge of this piece that can be used to aid prying.

    Voeg opmerking toe

    • Remove the sticker overlaying the NEXTEL logo.

    Voeg opmerking toe

    • Using a Torx T8 screwdriver, remove the two screws exposed after removing the sticker by unscrewing counterclockwise.

    Voeg opmerking toe

    • Starting from the bottom and working towards the top, use a spudger to pry the back cover off the phone.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Austin Lake

Lid sinds: 18-10-13

501 Reputatie

5 handleidingen geschreven

Team

Clemson, Team 13-3, Benson Fall 2013 Lid van Clemson, Team 13-3, Benson Fall 2013

CLEM-BENSON-F13S13G3

3 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 118