Repareer je spullen Gemeenschap Winkel

Mid F900 Speaker Replacement

Inleiding

This is a guide to replace the speaker in the device. Make sure to follow all the steps correctly and handle with care.

Wat je nodig hebt

  1. Mid F900 Speaker Replacement, Back Cover: stap 1, afbeelding 1 van 1

    • Using a J00 Phillips-head screwdriver, remove the two screws located at the bottom of the device.

    • Screws are 5mm x 1mm in size.

    Vertaal

  2. Mid F900 Speaker Replacement: stap 2, afbeelding 1 van 2 Mid F900 Speaker Replacement: stap 2, afbeelding 2 van 2

    • Use the plastic opening tool to pry off the white back-plate of the device.

    Vertaal

  4. Mid F900 Speaker Replacement, Speaker: stap 3, afbeelding 1 van 1

    • Follow the black and red wires coming from the white back plate to the motherboard.

    • For soldering help, use the How to Solder and Desolder Connections guide.

    • Carefully use the soldering iron to desolder the wires from the motherboard.

    • Do not keep the soldering gun on the motherboard for too long or damage may occur to the device.

    Vertaal

  5. Mid F900 Speaker Replacement: stap 4, afbeelding 1 van 1

    • Use the nylon spudger to gently pry the speaker from the case. Then put the new speaker in.

    • You will need to resolder the wires from the new speaker to the motherboard.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Jacques Pierre

Lid sinds: 09/07/16

336 Reputatie

2 handleidingen geschreven

Medailles: 8

+5 andere badges

Team

USF Tampa, Team 6-6, Remmell Fall 2016 Lid van USF Tampa, Team 6-6, Remmell Fall 2016

USFT-REMMELL-F16S6G6

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 6

Altijd: 140