Repareer je spullen Gemeenschap Winkel

Maze Speed SSB-508 Power and Volume Button Replacement

Inleiding

This guide will show you how to replace the power and volume buttons in a Maze Speed SSB-508 phone. If the power or volume buttons are unresponsive or malfunctioning, they may need to be replaced. To complete this guide, a plastic opening tool, tweezers, and a new button piece is required. Precision is recommended, as to not damage any components.

Wat je nodig hebt

  1. Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: stap 1, afbeelding 1 van 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: stap 1, afbeelding 2 van 3 Maze Speed SSB-508 Power and Volume Button Replacement, Power and Volume Buttons: stap 1, afbeelding 3 van 3

    • Remove the back cover by gently prying open the bottom left corner of the case with the plastic opening tool.

    Vertaal

  3. Maze Speed SSB-508 Power and Volume Button Replacement: stap 2, afbeelding 1 van 2 Maze Speed SSB-508 Power and Volume Button Replacement: stap 2, afbeelding 2 van 2

    • There are three areas holding the power and volume buttons in place. Gently pull the bottom of the power button with a pair of fine-tip tweezers to release the lower half.

    Vertaal

  4. Maze Speed SSB-508 Power and Volume Button Replacement: stap 3, afbeelding 1 van 3 Maze Speed SSB-508 Power and Volume Button Replacement: stap 3, afbeelding 2 van 3 Maze Speed SSB-508 Power and Volume Button Replacement: stap 3, afbeelding 3 van 3

    • Carefully remove the top section of the button with the fine-tip tweezers . This should free the button completely.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 4

Altijd: 285