Repareer je spullen Gemeenschap Winkel

MODRETRO Chromatic Disassembly

Inleiding

This is a step by step disassembly of the MODRETRO Chromatic. Use this guide when modifying or replacing components on Chromatic.

Wat je nodig hebt

  1. MODRETRO Chromatic Disassembly, Battery Cover and Batteries: stap 1, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Battery Cover and Batteries: stap 1, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Battery Cover and Batteries: stap 1, afbeelding 3 van 3

    • To remove the battery cover, push upward on the battery cover lock. The battery cover will pop open.

    • Lift the battery cover off and set aside.

    • Remove the batteries.

    • Always remove the batteries before working on your Chromatic!

    Bewerken

  2. MODRETRO Chromatic Disassembly, Back Shell: stap 2, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Back Shell: stap 2, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Back Shell: stap 2, afbeelding 3 van 3

    • Remove the back shell screws (x4) using a Tri-wing Y1 Screwdriver.

    • A Tri-wing Y1.5 will also work for all screws.

    • The screws near the top are a different length than the screws near the bottom of the shell.

    • Remove the back shell by lifting away from the device.

    Bewerken

  3. MODRETRO Chromatic Disassembly, Menu Button: stap 3, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Menu Button: stap 3, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Menu Button: stap 3, afbeelding 3 van 3

    • Remove the menu button by lifting it off the post. It will remove with little resistance.

    Bewerken

  4. MODRETRO Chromatic Disassembly, Battery Tray: stap 4, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Battery Tray: stap 4, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Battery Tray: stap 4, afbeelding 3 van 3

    • Remove the battery tray screws (x3) using a Tri-wing Y1 Screwdriver.

    • Remove the battery tray connector.

    • It is helpful to press lightly against the PCB with your off hand while working the connector loose.

    Bewerken

  6. MODRETRO Chromatic Disassembly, PCB: stap 5, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, PCB: stap 5, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, PCB: stap 5, afbeelding 3 van 3

    • Remove the PCB screw (x1) using a Tri-wing Y1 Screwdriver.

    • Carefully lift the LCD screen ribbon cable from the PCB.

    • Handle with care!

    • Carefully remove the PCB from the front shell.

    • Lifting at a slight angle will help clear the headphone jack on the bottom more easily. This is also important during re-assembly.

    Bewerken

  7. MODRETRO Chromatic Disassembly, Speaker Module: stap 6, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Speaker Module: stap 6, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Speaker Module: stap 6, afbeelding 3 van 3

    • Remove the speaker module screw (x1) using a Tri-wing Y1 Screwdriver.

    • Carefully remove the speaker module from the front shell.

    Bewerken

  8. MODRETRO Chromatic Disassembly, Buttons and Membranes: stap 7, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Buttons and Membranes: stap 7, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Buttons and Membranes: stap 7, afbeelding 3 van 3

    • Remove the rubber button membranes (x3) from their pockets.

    • Remove the buttons and the D-pad from the shell with tweezers or by hand. If you flip the shell over, they will fall out freely.

    • The buttons will come out easily once the membranes are removed.

    • When re-attaching the rubber button membranes, be sure the positive features on the membranes seat securely into the pockets on the shell.

    Bewerken

  9. MODRETRO Chromatic Disassembly, IR Window: stap 8, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, IR Window: stap 8, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, IR Window: stap 8, afbeelding 3 van 3

    • Carefully separate the IR window by gently wedging a plastic spudger between the IR window and the front shell.

    • Re-installing the IR window:

    • Note the side with the lip is inserted towards the front shell first.

    • Press in firmly until fully seated against the shell.

    • If the IR window fits loosely, the orientation is incorrect. The fit should be snug.

    Bewerken

  10. MODRETRO Chromatic Disassembly, Power Switch: stap 9, afbeelding 1 van 1

    • Remove the power switch by lifting away from the front shell. It will remove with little resistance.

    • When re-assembling the power switch, make sure it is inserted in the OFF position.

    Bewerken

  11. MODRETRO Chromatic Disassembly, Cartridge Backer: stap 10, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Cartridge Backer: stap 10, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Cartridge Backer: stap 10, afbeelding 3 van 3

    • Remove the cartridge backer screws (x3) using a Tri-wing Y1 Screwdriver.

    Bewerken

  12. MODRETRO Chromatic Disassembly, Battery Cover Disassembly: stap 11, afbeelding 1 van 3 MODRETRO Chromatic Disassembly, Battery Cover Disassembly: stap 11, afbeelding 2 van 3 MODRETRO Chromatic Disassembly, Battery Cover Disassembly: stap 11, afbeelding 3 van 3

    • Remove the screws (x2) securing the latch cover using a Tri-wing Y1 Screwdriver.

    • Remove the door plate spring by fully depressing the battery cover lock. The spring should pop out.

    • Use a spudger if the spring does not fully dislodge.

    • Once the spring is removed, the battery cover lock can be removed without resistance through the underside of the battery cover.

    Bewerken
Eindstreep

3 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

MODRETRO

Lid sinds: 12/05/24

255 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 54

Afgelopen 30 dagen: 185

Altijd: 1,607