Repareer je spullen Gemeenschap Winkel

LeapFrog Scribble and Write Speaker Replacement

Inleiding

This guide is for those who are looking to replace their Scribble and Write’s speaker due to muffled or distorted sounds. Familiarity with soldering is necessary in being able to replace the speaker. Please be sure to follow each and every step to avoid mishaps and causing further damage to the toy.

For more information on how to solder and desolder connections, please visit this guide.

Wat je nodig hebt

  1. LeapFrog Scribble and Write Speaker Replacement, Speaker: stap 1, afbeelding 1 van 1

    • Turn your toy over so that the back is facing upward.

    Bewerken

  2. LeapFrog Scribble and Write Speaker Replacement: stap 2, afbeelding 1 van 1

    • Using a Phillips #00 screwdriver, unscrew all circled areas.

    Bewerken

  4. LeapFrog Scribble and Write Speaker Replacement: stap 3, afbeelding 1 van 1

    • Very carefully, remove the back case to reveal the contents of the toy.

    Bewerken

  5. LeapFrog Scribble and Write Speaker Replacement: stap 4, afbeelding 1 van 1

    • Using a Phillips #00 screwdriver, remove the screw highlighted in the image.

    Bewerken

  6. LeapFrog Scribble and Write Speaker Replacement: stap 5, afbeelding 1 van 1

    • Un-solder the wiring from the speaker and motherboard.

    • Caution: Be careful when using a soldering iron. Improper usage may result in burns.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 7 andere bijdragers

Anthony Kidd

Lid sinds: 02/10/16

256 Reputatie

2 handleidingen geschreven

Medailles: 14

+11 andere badges

Team

USF Tampa, Team 1-5, Nance Spring 2016 Lid van USF Tampa, Team 1-5, Nance Spring 2016

USFT-NANCE-S16S1G5

3 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 13

Altijd: 722