Inleiding
Your display screen may be unresponsive to the touch of your toy's stylus pen. Your toy may also display the wrong input. This could be happening because of a build up of debris. Your display screen will need to be cleaned or replaced.
Wat je nodig hebt
-
-
-
Turn your toy over.
-
Use a Phillips screwdriver to remove the nine case screws from the back of the toy.
Vraag FixBot
-
-
-
-
Use a Philips screwdriver to remove the two screws attached to the motherboard.
-
Remove the motherboard.
-
-
-
Use a Phillips screwdriver to remove the screw from the green clip that holds the two screen layers together.
-
-
-
Separate the blue and the white films.
-
Clean both films with paper towel.
-
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
USF Tampa, Team 1-5, Nance Spring 2016 Lid van USF Tampa, Team 1-5, Nance Spring 2016
USFT-NANCE-S16S1G5
3 Leden
10 handleidingen geschreven
