Inleiding

These steps show how to remove the phone's front case. This allows access to many of the components located on the outer face of the phone.

Remove the four grey plugs using either tweezers or a push pin.
  • Remove the four grey plugs using either tweezers or a push pin.

Voeg opmerking toe

Remove the four screws that are now exposed using a Phillips #00 screwdriver.
  • Remove the four screws that are now exposed using a Phillips #00 screwdriver.

  • Be sure to put the screws in a safe place as they are very small and easy to lose.

Voeg opmerking toe

  • Once all the screws have been removed, use a plastic opener tool to pry the case from the rest of the phone.

  • Insert the opener tool into the seem between the case and the phone. Apply pressure to separate the two pieces.

  • Do this across the entire length of the seem until the case is no longer attached to the phone.

Voeg opmerking toe

  • The case can now be removed and the interior of the front is accessible.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ryan Bishop

Lid sinds: 17-04-12

1 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 12-39, Regan Spring 2012 Lid van Cal Poly, Team 12-39, Regan Spring 2012

CPSU-REGAN-S12S12G39

3 Leden

16 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 679