Gevaar
Mogelijk gevaarlijk
Als deze procedure niet goed wordt gevolgd, kan deze leiden tot letsel. Werk voorzichtig en volg alle waarschuwingen.
Gevaar

Inleiding

This guide will show you how to open up your Blu-ray player and remove the power cord if it is faulty and causing problems related to powering the device.

Onderdelen

Geen onderdelen nodig.

Ensure the device is unplugged to prevent shocks.
  • Ensure the device is unplugged to prevent shocks.

  • Remove the three black 3/16” Phillips #2 screws from the backside of the player.

  • With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.

Voeg opmerking toe

Beware of the capacitors as they may shock you when touched.
  • Beware of the capacitors as they may shock you when touched.

  • Detach the power supply cord from the brown logic board by pushing the locking clip on the connector, and pulling out.

    • The connector may be difficult to remove. Wiggling it while pulling out may help release it.

  • Remove the power cord from the panel by carefully sliding it upwards from its seating.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Bart Quicho

Lid sinds: 13-01-15

448 Reputatie

3 handleidingen geschreven

Team

UW Tacoma, Team 1-1, Rose Winter 2015 Lid van UW Tacoma, Team 1-1, Rose Winter 2015

UWT-ROSE-W15S1G1

4 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 20

Altijd: 812