Inleiding

The back panel protects the internal components of the blender.

Onderdelen

Geen onderdelen nodig.

Remove the glass container and place the blender upside down on a solid surface. Remove the four rubber feet using the needle nose pliers. Remove the four #7.5 Phillips 25mm screws that were located underneath the rubber feet using the Phillips #2 screwdriver.
  • Remove the glass container and place the blender upside down on a solid surface.

  • Remove the four rubber feet using the needle nose pliers.

  • Remove the four #7.5 Phillips 25mm screws that were located underneath the rubber feet using the Phillips #2 screwdriver.

Voeg opmerking toe

Lift the back panel up, sliding it along the power cord.
  • Lift the back panel up, sliding it along the power cord.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cameron Geehr

Lid sinds: 28-09-14

681 Reputatie

6 handleidingen geschreven

Team

Cal Poly, Team 12-5, Forte Fall 2014 Lid van Cal Poly, Team 12-5, Forte Fall 2014

CPSU-FORTE-F14S12G5

5 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 183