Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch-kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Locate the battery's power ribbon. Use nylon spudger to disconnect the ribbon from the mother board.
    • Locate the battery's power ribbon.

    • Use nylon spudger to disconnect the ribbon from the mother board.

  4. Peel battery away. Battery is glued and may cause permanent damage if bent.
    • Peel battery away.

    • Battery is glued and may cause permanent damage if bent.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

aaa

Lid sinds: 06-10-16

675 Reputatie

5 handleidingen geschreven

Team

USF Tampa, Team 2-3, Sullivan Fall 2016 Lid van USF Tampa, Team 2-3, Sullivan Fall 2016

USFT-SULLIVAN-F16S2G3

4 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 29

Afgelopen 30 dagen: 130

Altijd: 3,222