Ga door naar hoofdinhoud

JBL Clip 2 Audio AUX Cord Replacement

Wat je nodig hebt

  1. JBL Clip 2 Audio AUX Cord Replacement, Audio AUX Cord: stap 1, afbeelding 1 van 1
    • Begin by removing the front cap of the JBL Clip 2 by using the blue plastic opening tool to get in between the creases.

    • If your JBL Clip 2 has never been opened this procedure will require moderate amount of force.

  2. JBL Clip 2 Audio AUX Cord Replacement: stap 2, afbeelding 1 van 1
    • There will be six 3 mm T8 screws under the cap, remove these six screws. Save

    • If you are not trying to replace the speaker please ignore the two middle 3 mm T8 screws during this procedure.

  3. JBL Clip 2 Audio AUX Cord Replacement: stap 3, afbeelding 1 van 1
    • The front cover will lift open easily and the components will be visible.

  4. JBL Clip 2 Audio AUX Cord Replacement: stap 4, afbeelding 1 van 1
    • To completely remove the top portion, disconnect the speaker from the motherboard using the blue plastic opening tool.

    • While disconnecting be sure to not use too much force as these two parts are meant to become disconnected.

  5. JBL Clip 2 Audio AUX Cord Replacement: stap 5, afbeelding 1 van 1
    • There will be four 3 mm T8 screws holding the motherboard in place, remove these four screws.

  6. JBL Clip 2 Audio AUX Cord Replacement: stap 6, afbeelding 1 van 1
Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Michael Hong

Lid sinds: 02/01/17

1.014 Reputatie

5 handleidingen geschreven

Team

UW Tacoma, Team 2-2, Rose Winter 2017 Lid van UW Tacoma, Team 2-2, Rose Winter 2017

UWT-ROSE-W17S2G2

4 Leden

7 handleidingen geschreven

Één opmerking

<a href="https://www.w3schools.com/">Visit W3Schools.com!</a>

pavan kalyan - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 10

Afgelopen 30 dagen: 29

Altijd: 3,605