Ga door naar hoofdinhoud

Insignia Flex 8 Battery Replacement

Wat je nodig hebt

  1. Insignia Flex 8 Battery Replacement, Battery: stap 1, afbeelding 1 van 1
    • Make sure the power is off to avoid injury in the following steps.

    • Position the tablet so that the screen is face down.

    • The power button is located in the upper left hand corner.

    • Hold the power button for three seconds until the tablet powers down.

  2. Insignia Flex 8 Battery Replacement: stap 2, afbeelding 1 van 2 Insignia Flex 8 Battery Replacement: stap 2, afbeelding 2 van 2
    • Remove the back casing by sliding a credit card or a similarly thin but firm object in between the casing and the screen.

    • Run this object around the perimeter of the tablet until there is separation between the casing and the screen.

    • Remove the back casing and set aside.

  3. Insignia Flex 8 Battery Replacement: stap 3, afbeelding 1 van 1
    • Peel back the tape from battery and case.

  4. Insignia Flex 8 Battery Replacement: stap 4, afbeelding 1 van 1
    • Slide the spudger beneath battery to pry away it away from the case. Work around the battery, prying up all edges to remove from glue.

    • Do not puncture or bend battery. This could cause battery to leak acid.

  5. Insignia Flex 8 Battery Replacement: stap 5, afbeelding 1 van 1
    • Desolder the black, yellow and red connections from circuit board. Desoldering Help

    • Keep the soldering tool away from other components on the circuit board.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Tyler Tyrrell

Lid sinds: 03/11/15

890 Reputatie

4 handleidingen geschreven

Team

Colorado Springs, Team 5-5, Panko Spring 2015 Lid van Colorado Springs, Team 5-5, Panko Spring 2015

UCCS-PANKO-S15S5G5

3 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 9,092