Ga door naar hoofdinhoud

InFocus LP540 Projector Lamp Replacement

Wat je nodig hebt

  1. InFocus LP540 Projector Lamp Replacement, Lamp: stap 1, afbeelding 1 van 2 InFocus LP540 Projector Lamp Replacement, Lamp: stap 1, afbeelding 2 van 2
    • Place the projector on its back with the control buttons facing down.

    • Remove the black 7mm screw on the external case with a Phillips 2 screwdriver.

  2. InFocus LP540 Projector Lamp Replacement: stap 2, afbeelding 1 van 1
    • Use the plastic flat-head to remove the lamp lid.

  3. InFocus LP540 Projector Lamp Replacement: stap 3, afbeelding 1 van 2 InFocus LP540 Projector Lamp Replacement: stap 3, afbeelding 2 van 2
    • Remove the 7mm screw near the bottom center with a Philips 2 screwdriver head.

    • Loosen but do not remove the 7mm screw near the upper right corner with the Phillips 2 screwdriver head.

  4. InFocus LP540 Projector Lamp Replacement: stap 4, afbeelding 1 van 3 InFocus LP540 Projector Lamp Replacement: stap 4, afbeelding 2 van 3 InFocus LP540 Projector Lamp Replacement: stap 4, afbeelding 3 van 3
    • Grab the silver handle.

    • Unhook the handle so it can move freely.

    • Pull the handle straight up until the lamp is completely removed from projector.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Jorge L Navarro

Lid sinds: 01/22/14

533 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 13-17, Regan Winter 2014 Lid van Cal Poly, Team 13-17, Regan Winter 2014

CPSU-REGAN-W14S13G17

6 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 3,108