Repareer je spullen Gemeenschap Winkel

How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.

Inleiding

Using this guide you can fix this toy in 15-20 minutes without having to buy a new one. There are several tools you will need to fix this Little Tikes Bubble Mower. You will need a Philips screw driver size PH1, and a soldering tool. (If you don't know how to solder, look at iFixit's How to Solder and Desolder connections.)

Wat je nodig hebt

  1. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower., How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 1, afbeelding 1 van 1

    • Start with a flat, open space to work.

    Bewerken

  2. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 2, afbeelding 1 van 2 How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 2, afbeelding 2 van 2

    • Unscrew these three 1.2 mm screws.

    Bewerken

  3. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 3, afbeelding 1 van 1

    • Remove the Bubble Sprocket from the motor.

    Bewerken

  4. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 4, afbeelding 1 van 1

    • Unscrew these four 1.2mm screws holding the plate on.

    Bewerken

  5. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 5, afbeelding 1 van 1

    • Remove the plate.

    Bewerken

  7. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 6, afbeelding 1 van 1

    • Connect the red wire to the top right pin.

    Bewerken

  8. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 7, afbeelding 1 van 1

    • Solder the Red wire to the metal pin.

    • (Warning Soldering is very hot!)

    Bewerken

  9. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 8, afbeelding 1 van 2 How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 8, afbeelding 2 van 2

    • Connect the yellow wire to the bottom right pin.

    • Solder the yellow wire to the bottom right pin.

    • (Warning Soldering iron is very hot!)

    Bewerken

  10. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 9, afbeelding 1 van 1

    • Replace the plate over the wires.

    Bewerken

  11. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 10, afbeelding 1 van 1

    • Put four 1.2 mm screws for the plate back into place.

    Bewerken

  12. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 11, afbeelding 1 van 1

    • Put three 1.2mm screws for the motor back into place.

    Bewerken

  13. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 12, afbeelding 1 van 1

    • Insert the Bubble sprocket onto the motor.

    Bewerken

  14. How to Repair the Electrical Connections on a Little Tikes Motorized Bubble Mower.: stap 13, afbeelding 1 van 1

    • You are now finished!

    Bewerken
Eindstreep

Auteur

met 1 andere bijdrager

John Hiller

Lid sinds: 10/05/15

110 Reputatie

1 Handleiding geschreven

Medailles: 2

Team

Colorado Springs, Team 7-5, Mcmichael Fall 2015 Lid van Colorado Springs, Team 7-5, Mcmichael Fall 2015

UCCS-MCMICHAEL-F15S7G5

1 Lid

1 handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 9

Altijd: 1,803