Ga door naar hoofdinhoud

How to Fix a Broken XLR Microphone Cable

Wat je nodig hebt

  1. How to Fix a Broken XLR Microphone Cable, How to Fix a Broken XLR Microphone Cable: stap 1, afbeelding 1 van 3 How to Fix a Broken XLR Microphone Cable, How to Fix a Broken XLR Microphone Cable: stap 1, afbeelding 2 van 3 How to Fix a Broken XLR Microphone Cable, How to Fix a Broken XLR Microphone Cable: stap 1, afbeelding 3 van 3
    • This guide will utilize a soldering iron. Please use a heat-resistant surface and proceed with caution.

    • Place the end of the XLR Cable on a clean, uncluttered surface.

    • Using a small screwdriver, unscrew the single screw near the top of the cable.

    • Gently pull apart the exterior metal from the internal mechanism.

  2. How to Fix a Broken XLR Microphone Cable: stap 2, afbeelding 1 van 1
    • Assess which connections have fallen loose. In this instance, the white cable is disconnected.

  3. How to Fix a Broken XLR Microphone Cable: stap 3, afbeelding 1 van 2 How to Fix a Broken XLR Microphone Cable: stap 3, afbeelding 2 van 2
    • Assess whether or not there's enough exposed wire to reconnect loose cables. In this instance, the exposed cables are too short to effectively reconnect.

    • If the exposed wires are too short, use wire strippers or a razor to cut back the insulation.

    • Separate the wires.

  4. How to Fix a Broken XLR Microphone Cable: stap 4, afbeelding 1 van 3 How to Fix a Broken XLR Microphone Cable: stap 4, afbeelding 2 van 3 How to Fix a Broken XLR Microphone Cable: stap 4, afbeelding 3 van 3
    • Soldering irons are extremely hot. Proceed with extreme caution.

    • Solder each of the loose wires to the coinciding metal prong.

    • For more information on effectively soldering wire, please visit iFixit's Soldering Guide.

    • If necessary, use a thin wire to further manipulate the connection.

  5. How to Fix a Broken XLR Microphone Cable: stap 5, afbeelding 1 van 2 How to Fix a Broken XLR Microphone Cable: stap 5, afbeelding 2 van 2
    • When the soldering is complete, reconnect the metal exterior to the head of the cable.

    • Using a small screwdriver, reattach the single screw.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Abbie Zajac

Lid sinds: 01/19/16

203 Reputatie

1 Handleiding geschreven

Team

Één opmerking

Great repair. If the cabke is broken I have a video on resolving that issue. https://youtu.be/E8CiX4cnc-U

DIM Tips - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 36

Afgelopen 30 dagen: 147

Altijd: 25,003