Inleiding
If your Hover-1 Rally (model H1-RALY) scooter will not brake, use this guide to replace the acceleration lever. The brake switch is located next to the left handlebar grip and is easy to replace. Replace this part if it is damaged or immovable.
Check your brake pad first before using this guide. A worn down brake pad is a more common cause of the scooter not braking.
Make sure to power off the scooter before starting this guide.
Wat je nodig hebt
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.
Team
Cal Poly, Team S7-G2, Regan Winter 2020 Lid van Cal Poly, Team S7-G2, Regan Winter 2020
CPSU-REGAN-W20S7G2
6 Leden
7 handleidingen geschreven
Één opmerking
Hi good afternoon. I have a Rally H-1 scooter. It seems that my front wheel motor is messed up. But I can't find any parts fvor this scooter. I went on Hoover 1 website. But they don't have any parts available.
