Ga door naar hoofdinhoud

Hoover Power Path Pro Advanced Power Switch Replacement

Wat je nodig hebt

  1. Hoover Power Path Pro Advanced Power Switch Replacement, Power Switch: stap 1, afbeelding 1 van 1
    • Remove the lower brushroll from the bottom of the cleaner.

  2. Hoover Power Path Pro Advanced Power Switch Replacement: stap 2, afbeelding 1 van 1
    • Use a long #2 Philips head to remove the 8 numbered screws on the bottom of the cleaner (They will also be indicated on the bottom of the vacuum).

  3. Hoover Power Path Pro Advanced Power Switch Replacement: stap 3, afbeelding 1 van 2 Hoover Power Path Pro Advanced Power Switch Replacement: stap 3, afbeelding 2 van 2
    • Pull the red handle to remove the front suction unit from the cleaner.

  4. Hoover Power Path Pro Advanced Power Switch Replacement: stap 4, afbeelding 1 van 1
    • Unscrew the hose by using a Phillips #2 to detach it from the top cover of the cleaner.

  5. Hoover Power Path Pro Advanced Power Switch Replacement: stap 5, afbeelding 1 van 2 Hoover Power Path Pro Advanced Power Switch Replacement: stap 5, afbeelding 2 van 2
    • Push down on the handle release button. Lift the edge of top cover connected to this button.

    • Repeat the above step for the "On/Off" button.

    • Pull entire top cover off.

    • Caution: when pulling the handle release button, make sure the top of the cleaner does not fall.

  6. Hoover Power Path Pro Advanced Power Switch Replacement: stap 6, afbeelding 1 van 1
    • Remove the "On/Off" cap by pulling it upwards with caution.

  7. Hoover Power Path Pro Advanced Power Switch Replacement: stap 7, afbeelding 1 van 1
    • Use a long #2 Philips head to remove the two screws from the arched grey piece.

  8. Hoover Power Path Pro Advanced Power Switch Replacement: stap 8, afbeelding 1 van 2 Hoover Power Path Pro Advanced Power Switch Replacement: stap 8, afbeelding 2 van 2
    • Pull out the red power the red power switch.

Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

Jose Andres Gonzalez Valdes

Lid sinds: 01/22/18

682 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team S16-G5, Banghart Winter 2018 Lid van Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 Leden

15 handleidingen geschreven

3 opmerkingen

What is the part number?

martahayner - Antwoord

Thanks so much!!

debmccrimm - Antwoord

you have to test the switch, mine tested ok which led me to the fuse between the motor and switch. It was bad, parts warehouse part # 440004065 does the trick.

frank - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 20

Altijd: 3,514