Ga door naar hoofdinhoud

Honda EU2200IT A2 Air Filters Replacement

Wat je nodig hebt

  1. Honda EU2200IT A2 Air Filters Replacement, Honda EU2200IT A2 Safety Precautions: stap 1, afbeelding 1 van 1
    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

  2. Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: stap 2, afbeelding 1 van 2 Honda EU2200IT A2 Air Filters Replacement, Disconnect the spark plug: stap 2, afbeelding 2 van 2
    • Lift and remove the spark plug cover.

  3. Honda EU2200IT A2 Air Filters Replacement: stap 3, afbeelding 1 van 2 Honda EU2200IT A2 Air Filters Replacement: stap 3, afbeelding 2 van 2
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. Honda EU2200IT A2 Air Filters Replacement, Remove the maintenance cover: stap 4, afbeelding 1 van 1
    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

  5. Honda EU2200IT A2 Air Filters Replacement: stap 5, afbeelding 1 van 3 Honda EU2200IT A2 Air Filters Replacement: stap 5, afbeelding 2 van 3 Honda EU2200IT A2 Air Filters Replacement: stap 5, afbeelding 3 van 3
    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

  6. Honda EU2200IT A2 Air Filters Replacement, Remove the air filters: stap 6, afbeelding 1 van 1
    • Remove the Phillips screw securing the filter cover.

    • During reassembly, be sure to tighten the screw to at least 1.7 ft-lb to prevent it from loosening during operation.

  7. Honda EU2200IT A2 Air Filters Replacement: stap 7, afbeelding 1 van 2 Honda EU2200IT A2 Air Filters Replacement: stap 7, afbeelding 2 van 2
    • Remove the filter cover.

  8. Honda EU2200IT A2 Air Filters Replacement: stap 8, afbeelding 1 van 2 Honda EU2200IT A2 Air Filters Replacement: stap 8, afbeelding 2 van 2
    • Remove the air filters from the filter box.

    • To clean the filters:

    • Clean the filters in warm soapy water.

    • Allow the filters to dry thoroughly.

    • Dip the filters in clean engine oil, and squeeze out any excess oil.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Lid sinds: 01/03/18

254.671 Reputatie

529 handleidingen geschreven

Team

iFixit Lid van iFixit

Staff

136 Leden

17.439 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 14

Altijd: 332