Inleiding

The power button panel is one of the easiest components to replace on th HP 4320t. It may need replaceing, if damaged, to insure proper working order.

Onderdelen

Geen onderdelen nodig.

Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in. Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in.
  • Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in.

Voeg opmerking toe

Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver). Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver).
  • Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver).

Voeg opmerking toe

Flip laptop over and open it.
  • Flip laptop over and open it.

Voeg opmerking toe

Slightly push up while lifting up on the power button panel to release the panel.
  • Slightly push up while lifting up on the power button panel to release the panel.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Joshua

Lid sinds: 23-09-14

88 reputatie

6 handleidingen geschreven

Team

USF Tampa, Team 9-5, Blackwell Fall 2014 Lid van USF Tampa, Team 9-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G5

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 3

Altijd: 363