Inleiding
If your computer spends a lot of time rebooting, freezing, or shows the 'Blue Screen of Death', it is possible that your Random Access Memory (RAM) is to blame. A replacement will be necessary. Follow these steps after purchasing a new RAM to replace.
Wat je nodig hebt
-
-
Locate the RAM on the bottom side of the laptop, the cover is secured by a 6 millimeter screw. Remove this with a Philips #1 screwdriver.
Vraag FixBot
-
-
-
Underneath are the RAM boards. They are secured by two plastic clips each. Locate these to continue removal.
-
-
-
-
Place your thumbs on two of the clips securing one board. Push outwards on the clips. This should pop the board up.
-
-
-
Repeat on second board. When both are released, they should appear as they do in the picture.
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
UMass Dartmouth, Team S3-G8, Peak Spring 2018 Lid van UMass Dartmouth, Team S3-G8, Peak Spring 2018
UMASSD-PEAK-S18S3G8
3 Leden
8 handleidingen geschreven
