Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

In this guide, we will illustrate how to remove and replace the hard drive for this device. Tools required include thumbs and a Phillips screwdriver.

  1. Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive . Lift up the cover.
    • Loosen the two 1.5 cm Phillips #1 screws that attach the cover of the hard drive .

    • Lift up the cover.

  2. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  3. Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop. Locate the tab on the hard drive. Use this tab to pull the hard drive toward the right side of the case.
    • Loosen the 1.5 cm Phillips #1 screw attaching the hard drive to the laptop.

    • Locate the tab on the hard drive.

    • Use this tab to pull the hard drive toward the right side of the case.

    • Do not pull up on the tab!

    • Remove the hard drive.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tyler Fricks

Lid sinds: 22-10-15

519 Reputatie

5 handleidingen geschreven

Team

Montana Tech, Team 3-2, Shirk Fall 2015 Lid van Montana Tech, Team 3-2, Shirk Fall 2015

MTUM-SHIRK-F15S3G2

5 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 47

Altijd: 2,823