Ga door naar hoofdinhoud

Onderdelen

Geen onderdelen opgegeven.

  1. Eject the battery from the computer by sliding the two clips on the bottom of the computer toward the center of the computer. Slide the battery out as shown in the picture.
    • Eject the battery from the computer by sliding the two clips on the bottom of the computer toward the center of the computer.

    • Slide the battery out as shown in the picture.

  2. Once keyboard is loose, do not immediately remove it from the computer. It is attached by a ribbon connector.
    • Once keyboard is loose, do not immediately remove it from the computer. It is attached by a ribbon connector.

    • Using a metal wedge tool, pry up along the top edge of the keyboard until all clips are disengaged and the keyboard is loose from the computer.

  3. To disconnect the ribbon connector, flip up the black clip shown in the picture.
    • To disconnect the ribbon connector, flip up the black clip shown in the picture.

    • Gently pull the ribbon until disconnected.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Dilan Johnson

Lid sinds: 12-02-18

615 Reputatie

4 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 307