Inleiding

The shell on the RC Mustang GT is mostly a cosmetic component, giving the car the unique appearance associated with GEAR'D UP's RC cars. The following steps will show how to replace the shell of the car.

Onderdelen

Geen onderdelen nodig.

  1. Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.
    • Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.

    Voeg opmerking toe

  2. Flip the car over again to its upright position and vertically lift the shell from the car.
    • Flip the car over again to its upright position and vertically lift the shell from the car.

    • During re-assembly, make sure the shell is correctly aligned. If it is not aligned correctly, it may rub on the wheels, possibly preventing them from turning.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Claudia Robinson

Lid sinds: 01-02-15

395 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 8-38, Amido Winter 2015 Lid van Cal Poly, Team 8-38, Amido Winter 2015

CPSU-AMIDO-W15S8G38

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 146