Inleiding

In this guide the repairer replaces the microphone by disassembling the device to access the motherboard.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

  • Fine Point Tweezers
  • Spudger

Estimated Duration: 10 minutes

Onderdelen

Geen onderdelen nodig.

After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.
  • After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

Voeg opmerking toe

Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch. Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.
  • Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

Voeg opmerking toe

The motherboard will now freely separate from the back casing; lay it flat next to the housing. The motherboard will now freely separate from the back casing; lay it flat next to the housing.
  • The motherboard will now freely separate from the back casing; lay it flat next to the housing.

Voeg opmerking toe

Disconnect the speaker and battery from their terminals on the motherboard. This should disconnect the motherboard completely from the back panel. This step is optional but is recommended as it will create more room to work.
  • Disconnect the speaker and battery from their terminals on the motherboard. This should disconnect the motherboard completely from the back panel.

    • This step is optional but is recommended as it will create more room to work.

    • It is recommended that you use tweezers or the spudger for precision.

Voeg opmerking toe

Gently pull out the microphone wire from the terminal.  Tweezers are recommended for precision.
  • Gently pull out the microphone wire from the terminal. Tweezers are recommended for precision.

Voeg opmerking toe

The microphone component should now be completely separated from the motherboard.
  • The microphone component should now be completely separated from the motherboard.

  • Plug in new, functional microphone component.

Voeg opmerking toe

Eindstreep

Matt West

Lid sinds: 18-04-13

22 reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 13-65, Johann Spring 2013 Lid van Cal Poly, Team 13-65, Johann Spring 2013

CPSU-JOHANN-S13S13G65

3 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 320