Inleiding

Use this guide to remove the battery cover and battery from the Game Boy.

Onderdelen

Geen onderdelen nodig.

Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad. Once the screw has been loosened, lift the cover off the back of the device. Once the screw has been loosened, lift the cover off the back of the device.
  • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

  • Once the screw has been loosened, lift the cover off the back of the device.

Voeg opmerking toe

Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector. Gently grab the wires. Gently grab the wires.
  • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

  • Gently grab the wires.

I heard of someone doing this and the connecter got stuck in the plug. Is there any other way to do it?

Lucas Hoekstra (Lucas9810) - Antwoord

Carefully pull the wires until the connector comes out of the device. Be careful! Don't pull too hard, or you may rip the wires out from the connector.
  • Carefully pull the wires until the connector comes out of the device.

  • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

  • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Jack

Lid sinds: 21-01-10

243 Reputatie

9 handleidingen geschreven

Team

Cal Poly, Team 8-46, Regan Winter 2010 Lid van Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

5 Leden

15 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 5

Afgelopen 7 Dagen: 17

Afgelopen 30 Dagen: 72

Altijd: 10,621