Word lid van de reparatiegemeenschap - Account aanmaken

Inleiding

There are two LCD displays on this phone. When the phone is opened, the inside display has a cover with a piece of protective glass glued to it. Since this phone is designed to be water-resistant, breaking the factory seal made by the glue is not recommended as it may expose the inner electronics to moisture. This guide treats the glass and cover as a single part.

Wat je nodig hebt

Stap 1 Inside Screen Cover

G'z One Boulder Inside Screen Cover Replacement, Inside Screen Cover: stap 1, afbeelding 1 van 1

There are 4 black screws that need to be removed on the top of the lid. A 1.5mm flathead screwdriver will work on the star shaped screw heads.
Make note that two of the screws closest to the hinge are longer than the other two.

Vertaal

Vraag FixBot

Stap 2

Remove the two side screws.
When reassembling you may need to press the front and back of the lid together when inserting these side screws so that the holes align.

Vertaal

Vraag FixBot

Stap 3

Use a plastic opening tool to remove the screen cover from the rest of the lid.

Vertaal

Vraag FixBot

Stap 4

Your phone should look like the picture to the left.
If reassembling from a previous step make sure the ribbon cable is properly situated before securing the front cover.