Ga door naar hoofdinhoud

Inleiding

This very simple guide will show you how to replace loose or worn knobs that control the volume, tone, and gain of the guitar amplifier. The steps shown in this guide are the same for each knob and none of them require any tools.

  1. First Act MA2039 Adjustment Knobs Replacement, Adjustment Knobs: stap 1, afbeelding 1 van 1
    • Firmly grasp the adjustment knob.

  2. First Act MA2039 Adjustment Knobs Replacement: stap 2, afbeelding 1 van 2 First Act MA2039 Adjustment Knobs Replacement: stap 2, afbeelding 2 van 2
    • Carefully, pull the adjustment knob towards yourself until it comes off the screw underneath.

    • Repeat for each knob until all are removed from the amplifier.

  3. First Act MA2039 Adjustment Knobs Replacement: stap 3, afbeelding 1 van 3 First Act MA2039 Adjustment Knobs Replacement: stap 3, afbeelding 2 van 3 First Act MA2039 Adjustment Knobs Replacement: stap 3, afbeelding 3 van 3
    • Observe the plastic knob piece and the screw that it came off of.

    • Notice how the grooves on the inside of the plastic knob align with the grooves on the screw. Proper alignment of these two pieces will be important when reassembling.

    • After the adjustment knobs are fixed, it's time to get groovy!

Conclusie

To reassemble your device, follow these instructions in reverse order.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 10

Altijd: 244