Repareer je spullen Gemeenschap Winkel

Eureka EasyClean 71C Power Cord Replacement

Inleiding

While the power cord is built to last for quite a while, it can still suffer from wear-and-tear. Additionally, accidents that damage the power cord can happen. This guide covers how to replace the vacuum’s power cord.

Wat je nodig hebt

  1. Eureka EasyClean 71C Power Cord Replacement, Bottom Cover: stap 1, afbeelding 1 van 1

    • Unscrew the two 18.1 mm PH2 Phillips head screws on the bottom of the vacuum.

    Bewerken

  2. Eureka EasyClean 71C Power Cord Replacement: stap 2, afbeelding 1 van 1

    • Pry off the Riser Visor using the plastic opening tool.

    Bewerken

  3. Eureka EasyClean 71C Power Cord Replacement: stap 3, afbeelding 1 van 1

    • Remove the screw cap using the metal spudger.

    • First-time removal of the screw cap can be difficult. The screw cap isn’t vital, so don’t worry about damaging the screw cap and just keep trying until it comes out.

    Bewerken

  5. Eureka EasyClean 71C Power Cord Replacement: stap 4, afbeelding 1 van 2 Eureka EasyClean 71C Power Cord Replacement: stap 4, afbeelding 2 van 2

    • Unscrew the 14mm PH2 Phillips head screw.

    • Pull the bottom cover off of the rest of the casing.

    Bewerken

  6. Eureka EasyClean 71C Power Cord Replacement, Casing: stap 5, afbeelding 1 van 1

    • Pull the power switch all the way up and remove the dust cup.

    Bewerken

  7. Eureka EasyClean 71C Power Cord Replacement: stap 6, afbeelding 1 van 2 Eureka EasyClean 71C Power Cord Replacement: stap 6, afbeelding 2 van 2

    • Unscrew the six 18.1mm PH2 Phillips head screws on the side of the vacuum.

    • Pull the casing apart.

    Bewerken

  8. Eureka EasyClean 71C Power Cord Replacement, Power Cord: stap 7, afbeelding 1 van 1

    • Pull out the switch board.

    • Ensure the vacuum is powered off and unplugged before handling any electronics.

    Bewerken

  9. Eureka EasyClean 71C Power Cord Replacement: stap 8, afbeelding 1 van 2 Eureka EasyClean 71C Power Cord Replacement: stap 8, afbeelding 2 van 2

    • Desolder the highlighted black and white wires.

    • For instructions on how to solder and desolder wires, visit this guide.

    Bewerken

  10. Eureka EasyClean 71C Power Cord Replacement: stap 9, afbeelding 1 van 1

    • Unscrew the 22.3mm PH2 Phillips head screw.

    • Remove the power cord.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Tanner Durnil

Lid sinds: 11/06/17

631 Reputatie

6 handleidingen geschreven

Medailles: 10

+7 andere badges

Team

IUPUI, Team S6-G4, Baechle Fall 2017 Lid van IUPUI, Team S6-G4, Baechle Fall 2017

IUPUI-BAECHLE-F17S6G4

3 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 9

Altijd: 359