Repareer je spullen Gemeenschap Winkel

Ematic EGQ307 Battery Replacement

Inleiding

If your battery is no longer charging or holding a charge you may need to replace it, in this guide you will learn exactly how to replace the battery in your tablet.

Wat je nodig hebt

  1. Ematic EGQ307 Battery Replacement, Battery: stap 1, afbeelding 1 van 2 Ematic EGQ307 Battery Replacement, Battery: stap 1, afbeelding 2 van 2

    • There are two screws on the side with the micro USB power port. Remove the two 2mm x 0.5mm screws with a Phillips #0 Screwdriver head.

    Bewerken

  2. Ematic EGQ307 Battery Replacement: stap 2, afbeelding 1 van 2 Ematic EGQ307 Battery Replacement: stap 2, afbeelding 2 van 2

    • Pry off the plastic backing with the spudger and the plastic opening tools. Anything that can provide enough leverage and not conduct electricity will also work for this purpose.

    • Carefully separate the front and back plates because the wire that connects the speaker is connected to both the front and back plates.

    Bewerken

  4. Ematic EGQ307 Battery Replacement: stap 3, afbeelding 1 van 1

    • 3. Once you pry off the plastic backing, you will expose the battery.

    • Carefully separate the front and back plates because the wire that connects the speaker is connected to both the front and back plates

    Bewerken

  5. Ematic EGQ307 Battery Replacement: stap 4, afbeelding 1 van 3 Ematic EGQ307 Battery Replacement: stap 4, afbeelding 2 van 3 Ematic EGQ307 Battery Replacement: stap 4, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Plastic Cards
    $2.99
    Koop

    • 4. Remove the tape holding the battery to the plastic frame. The battery is glued to the back of the LED. Pry the battery off the LED using a plastic card.

    • Do not bend or warp the battery. Even though the battery may not be working, it is still dangerous.

    Bewerken

  6. Ematic EGQ307 Battery Replacement: stap 5, afbeelding 1 van 1

    • If replacing the battery, unplug the black and red wires gently from the hardware and take off the battery .

    • If not replacing it, do not disconnect the red and black wires.

    • If replacing the battery, you will need a soldering kit to reconnect the wires with the new battery after disconnecting the old battery.

    • How To Solder and Desolder Connections.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order. Note, you need to solder the battery wires onto the motherboard.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 5 andere bijdragers

Othman

Lid sinds: 07/21/15

267 Reputatie

1 Handleiding geschreven

Medailles: 10

+7 andere badges

Team

Eastern Washington University, Team 1-1, Rowley SU 2015 Lid van Eastern Washington University, Team 1-1, Rowley SU 2015

EWU-ROWLEY-SU15S1G1

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 12

Altijd: 5,087