Ga door naar hoofdinhoud
Word lid van de reparatiegemeenschap - Account aanmaken

Eclipse 180BL Touch Pad Replacement

Wat je nodig hebt

    1. Eclipse 180BL Touch Pad  Replacement, Touch Pad: stap 1, afbeelding 1 van 1
      • Remove the two screws at the bottom of the device.

      • The two screws can be removed using the PH00 head located in the iFixit Repair toolkit.

      • The two screws are 1/8 inch in length.

      • Remove the cover to reveal the internal component.

      Vraag FixBot

      Voeg opmerking toe

    2. Eclipse 180BL Touch Pad  Replacement: stap 2, afbeelding 1 van 3 Eclipse 180BL Touch Pad  Replacement: stap 2, afbeelding 2 van 3 Eclipse 180BL Touch Pad  Replacement: stap 2, afbeelding 3 van 3
      • Using the Spudger, forcefully push upward on the USB port of the device to remove the main component.

      • This will release the tension on the multiple parts. One of which will be the touch pad.

      • The touch pad can now be easily replaced.

      • The touch pad has a smaller center piece that must be replaced for proper usage of the device.

      Vraag FixBot

      Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Annuleren: ik heb deze handleiding niet afgemaakt.

Één andere persoon heeft deze handleiding voltooid.

Thomas Schwarz

Lid sinds: 09/07/15

499 Reputatie

3 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 36

Altijd: 1,080