Ga door naar hoofdinhoud

EVGA x17 Optical Sensor Board Replacement

Wat je nodig hebt

  1. EVGA x17 Optical Sensor Board Replacement, Optical Sensor Board: stap 1, afbeelding 1 van 1
    • Remove the mouse skates to reveal 5 screws.

  2. EVGA x17 Optical Sensor Board Replacement: stap 2, afbeelding 1 van 1
    • Use a Phillips #00 screwdriver to remove the 5 screws that secure the bottom panel.

  3. EVGA x17 Optical Sensor Board Replacement: stap 3, afbeelding 1 van 1
    • Remove the weight chamber cover.

  4. EVGA x17 Optical Sensor Board Replacement: stap 4, afbeelding 1 van 1
    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

    • You can also use an iFixit opening tool to pry open the bottom panel.

  5. EVGA x17 Optical Sensor Board Replacement: stap 5, afbeelding 1 van 2 EVGA x17 Optical Sensor Board Replacement: stap 5, afbeelding 2 van 2
    • Remove the 2 screws to gain access to the sensor board.

  6. EVGA x17 Optical Sensor Board Replacement: stap 6, afbeelding 1 van 1
    • Pop the optical sensor out and replace it.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Sydney Puett

Lid sinds: 09/13/23

584 Reputatie

3 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 12

Altijd: 97