Ga door naar hoofdinhoud

EK3211 Kitchen Scale Disassembly

Wat je nodig hebt

  1. EK3211 Kitchen Scale Disassembly, Remove label to access screws: stap 1, afbeelding 1 van 1
    • Peel back the "ELECTRONIC KITCHEN SCALE" label to reveal two screws underneath.

  2. EK3211 Kitchen Scale Disassembly: stap 2, afbeelding 1 van 1
    • Use a #2 Phillips screwdriver to remove the two screws.

    • These screws are very tight and prone to strip.

  3. EK3211 Kitchen Scale Disassembly: stap 3, afbeelding 1 van 1
    • Remove the four screws holding the top veneer panel to the base.

  4. EK3211 Kitchen Scale Disassembly: stap 4, afbeelding 1 van 1
    • Remove the top veneer panel. It should come off without any force.

    • There are two small plastic clips on the edge below the screen, which must be inserted correctly during reassembly.

  5. EK3211 Kitchen Scale Disassembly: stap 5, afbeelding 1 van 1
    • Remove the screw holding the PCB and screen in place using a #1 Phillips screwdriver.

  6. EK3211 Kitchen Scale Disassembly: stap 6, afbeelding 1 van 1
    • Remove the PCB and screen assembly.

    • The buttons should also lift up with the rest of the PCB/screen assembly.

  7. EK3211 Kitchen Scale Disassembly: stap 7, afbeelding 1 van 1
    • Use a #1 Phillips screwdriver to remove the four screws holding the load cell mount to the base.

  8. EK3211 Kitchen Scale Disassembly: stap 8, afbeelding 1 van 1
    • Remove the two screws holding the load cell to the bracket using a #2 Phillips screwdriver.

  9. EK3211 Kitchen Scale Disassembly: stap 9, afbeelding 1 van 1
    • Separate the bracket from the load cell.

    • Be careful not to lose the spacer plate.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Steven Bell

Lid sinds: 08/27/20

493 Reputatie

2 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 9

Altijd: 268