Inleiding
For this guide you will remove six screws in order to remove the back cover.
Wat je nodig hebt
-
-
-
Remove the calculator's protective cover.
-
Place the calculator face down.
Vraag FixBot
-
-
-
-
Using a Phillips #1 screwdriver, remove the six 6mm screws from the back of the case and place them to the side.
-
Start from the notches on the top edge and use your fingers or a prying tool to carefully pry the back cover from the calculator.
-
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.
Team
Cal Poly, Team 11-52, Amido Spring 2014 Lid van Cal Poly, Team 11-52, Amido Spring 2014
CPSU-AMIDO-S14S11G52
4 Leden
20 handleidingen geschreven
