Inleiding

This guide details how to remove the logic board.

Slide the notch downward while pulling the back cover off to remove it.
  • Slide the notch downward while pulling the back cover off to remove it.

Voeg opmerking toe

Use your fingers to push the battery upward from the bottom.
  • Use your fingers to push the battery upward from the bottom.

  • Lift upwards to remove the battery.

Voeg opmerking toe

  • Unscrew the antenna in a counter-clockwise fashion.

  • Remove the aluminum cover.

Voeg opmerking toe

  • Unscrew the 3 screws shown.

  • Lift up the right part of the Nextel logo and unscrew the screw underneath.

Voeg opmerking toe

  • DO NOT force the cover off as it could damage the ribbon cable!

  • Gently lift the back cover off.

Voeg opmerking toe

  • Carefully pry off the connection between the headphone jack and logic board.

Voeg opmerking toe

  • Lift the first logic board off of the rest of the device.

Voeg opmerking toe

  • Gently lift the second logic board from the rest of the device.

  • DO NOT force the board straight off as it could damage the ribbon cable!

Voeg opmerking toe

  • Using tweezers, carefully pull off the connector shown.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Grant Glazebrook

Lid sinds: 14-04-10

7 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 29-61, Johann Spring 2010 Lid van Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 892