Inleiding

Today we are going to take you to a step by step guide on how to install a new keypad.

  1. Slide the notch downward while pulling the back cover off to remove it.
    • Slide the notch downward while pulling the back cover off to remove it.

    Voeg opmerking toe

  2. Use your fingers to push the battery upward from the bottom.
    • Use your fingers to push the battery upward from the bottom.

    • Lift upwards to remove the battery.

    Voeg opmerking toe

    • Unscrew the antenna in a counter-clockwise fashion.

    • Remove the aluminum cover.

    Voeg opmerking toe

    • Unscrew the 3 screws shown.

    • Lift up the right part of the Nextel logo and unscrew the screw underneath.

    Voeg opmerking toe

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • DO NOT force the cover off as it could damage the ribbon cable!

    • Gently lift the back cover off.

    Voeg opmerking toe

    • Carefully pry off the connection between the headphone jack and logic board.

    Voeg opmerking toe

    • Lift the first logic board off of the rest of the device.

    Voeg opmerking toe

    • Gently lift the second logic board from the rest of the device.

    • DO NOT force the board straight off as it could damage the ribbon cable!

    Voeg opmerking toe

    • Using tweezers, carefully pull off the connector shown.

    Voeg opmerking toe

    • Remove the keypad buttons off the front cover of the phone.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Jorge

Lid sinds: 14-04-10

4 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 29-61, Johann Spring 2010 Lid van Cal Poly, Team 29-61, Johann Spring 2010

CPSU-JOHANN-S10S29G61

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,315