Ga door naar hoofdinhoud

Inleiding

If one or both of the footswitches works inconsistently or not at all, refer to this guide.

Onderdelen

Geen onderdelen opgegeven.

  1. Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks. Remove the four 8mm Phillips #0 screws located on the back panel.
    • Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.

    • Remove the four 8mm Phillips #0 screws located on the back panel.

  2. Remove the back panel to expose the motherboard. Remove the back panel to expose the motherboard.
    • Remove the back panel to expose the motherboard.

  3. Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.
    • Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

  4. Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.
    • Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.

  5. Pull firmly on the binder clips that are holding the footswitches in place to remove them. To get the binder clips back in place, you will need to attach handles from another binder clip to hold them open. To get the binder clips back in place, you will need to attach handles from another binder clip to hold them open.
    • Pull firmly on the binder clips that are holding the footswitches in place to remove them.

    • To get the binder clips back in place, you will need to attach handles from another binder clip to hold them open.

  6. Pull the footswitch down and upwards to remove it from the casing.
    • Pull the footswitch down and upwards to remove it from the casing.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Één commentaar

So what is the fix? Replacing both foot switches with new ones? Or removing them and reinstalling them will fix the problem of them not working at all? What’s Step 7? If you stop after completing Step 6 you now just have a casing without foot switches. What will fix the problem of them not working qt all after removing the foot switches?

Carl - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 16

Altijd: 553