Inleiding

This guide will provide the steps for connecting your calculator to your computer.

Gereedschap

Onderdelen

Geen onderdelen nodig.

Download the software to allow you to connect your calculator to your computer from the Texas Instrument Website: http://education.ti.com/calculators/down...

Voeg opmerking toe

Make sure you have a TI USB cable to connect your calculator and computer The ends of the cable should look like those in this picture The ends of the cable should look like those in this picture
  • Make sure you have a TI USB cable to connect your calculator and computer

  • The ends of the cable should look like those in this picture

Voeg opmerking toe

Insert the plug into the the slot at the top of the calculator. Insert the plug into the the slot at the top of the calculator.
  • Insert the plug into the the slot at the top of the calculator.

Voeg opmerking toe

Connect the calculator to the computer through the USB port
  • Connect the calculator to the computer through the USB port

  • Through the TI connect program you are ready to perform actions such as viewing your calculator display on your computer screen

Voeg opmerking toe

Eindstreep

15 andere personen hebben deze handleiding voltooid.

Rueben Rodriguez

Lid sinds: 26-09-12

313 reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 7-52, Forte Fall 2012 Lid van Cal Poly, Team 7-52, Forte Fall 2012

CPSU-FORTE-F12S7G52

5 Leden

11 handleidingen geschreven

This didn't work for me. According to the ti download page for the software the NSPIRE is not listed as a supported device. It appears that the software for the NSPIRE is not free.

no way - Antwoord

the software link is wrong

here is the correct one

https://education.ti.com/en/software/det...

Maximman101 - Antwoord

the link is denied,

Fashion - Antwoord

The link is denied

Fashion - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 44

Afgelopen 7 Dagen: 227

Afgelopen 30 Dagen: 1,761

Altijd: 30,497