Ga door naar hoofdinhoud

Comfort Zone CZ6C Switch Replacement

Wat je nodig hebt

  1. Comfort Zone CZ6C Switch Replacement, Switch: stap 1, afbeelding 1 van 3 Comfort Zone CZ6C Switch Replacement, Switch: stap 1, afbeelding 2 van 3 Comfort Zone CZ6C Switch Replacement, Switch: stap 1, afbeelding 3 van 3
    • Make sure to unplug the Comfort Zone CZ6C before cutting any wires.

    • Before replacing your switch, learn how to solder using the How To Solder and Desolder Connections Guide.

    • Start with the fan on its back. Unscrew the back panel to expose the internal wiring.

  2. Comfort Zone CZ6C Switch Replacement: stap 2, afbeelding 1 van 2 Comfort Zone CZ6C Switch Replacement: stap 2, afbeelding 2 van 2
    • Remove the plastic cover on the switch by pulling it apart from the the back panel.

  3. Comfort Zone CZ6C Switch Replacement: stap 3, afbeelding 1 van 1
    • Use the soldering iron with caution. Don't touch the tip of the soldering iron to avoid the risk of injury.

    • This step can be made easier with the help of a partner to hold the wiring while you desolder the connection.

    • Disconnect the gray power wire from the switch by desoldering the connection.

  4. Comfort Zone CZ6C Switch Replacement: stap 4, afbeelding 1 van 2 Comfort Zone CZ6C Switch Replacement: stap 4, afbeelding 2 van 2
    • Cut the green and yellow wire as close to the switch connection as possible.

  5. Comfort Zone CZ6C Switch Replacement: stap 5, afbeelding 1 van 3 Comfort Zone CZ6C Switch Replacement: stap 5, afbeelding 2 van 3 Comfort Zone CZ6C Switch Replacement: stap 5, afbeelding 3 van 3
    • Strip the green and yellow wire about two centimeters from where it was just cut.

  6. Comfort Zone CZ6C Switch Replacement: stap 6, afbeelding 1 van 3 Comfort Zone CZ6C Switch Replacement: stap 6, afbeelding 2 van 3 Comfort Zone CZ6C Switch Replacement: stap 6, afbeelding 3 van 3
    • Unscrew the switch from the back panel and remove it.

  7. Comfort Zone CZ6C Switch Replacement: stap 7, afbeelding 1 van 3 Comfort Zone CZ6C Switch Replacement: stap 7, afbeelding 2 van 3 Comfort Zone CZ6C Switch Replacement: stap 7, afbeelding 3 van 3
    • After replacing the switch, resolder the gray power cord, the green wire, and the yellow wire.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

James Abundis

Lid sinds: 04/08/15

169 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 17-5, Forte Spring 2015 Lid van Cal Poly, Team 17-5, Forte Spring 2015

CPSU-FORTE-S15S17G5

4 Leden

5 handleidingen geschreven

Één opmerking

I need a replacement switch for a Comfort Zone CZ40 heater. Can you help?

Michael Drasic - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 21

Altijd: 2,308