Ga door naar hoofdinhoud

Wat je nodig hebt

  1. ColecoVision Cartridge Reader Replacement, Cartridge Reader: stap 1, afbeelding 1 van 1
    • Flip the console upside down and remove the eight 15mm Phillips #1 screws.

  2. ColecoVision Cartridge Reader Replacement: stap 2, afbeelding 1 van 2 ColecoVision Cartridge Reader Replacement: stap 2, afbeelding 2 van 2
    • Use the metal spudger along the bottom rim of the front panel to safely remove the top of the console. Set aside the top.

  3. ColecoVision Cartridge Reader Replacement: stap 3, afbeelding 1 van 2 ColecoVision Cartridge Reader Replacement: stap 3, afbeelding 2 van 2
    • Remove the two 15mm Phillips #1 screws holding the casing in place.

    • Remove the casing to reveal the cartridge reader.

  4. ColecoVision Cartridge Reader Replacement: stap 4, afbeelding 1 van 3 ColecoVision Cartridge Reader Replacement: stap 4, afbeelding 2 van 3 ColecoVision Cartridge Reader Replacement: stap 4, afbeelding 3 van 3
    • Desolder the sides of the cartridge reader using the soldering iron and desolder pump.

    • Refer to this soldering technique guide for reference

    • Patiently wait for the cartridge reader to cool down after being desoldered.

    • It's very important to remove all the tin from the motherboard and cartridge reader before lifting it from the motherboard. Failure to do so could damage the motherboard.

    • Carefully lift up the cartridge reader. A plastic spudger might be helpful in order to easily remove the cartridge reader.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Anastazia Kidder

Lid sinds: 17-10-18

109 Reputatie

1 Handleiding geschreven

Team

UW Tacoma, Team S1-G2, Rose Fall 2018 Lid van UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 Leden

12 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 55

Altijd: 1,161