Word lid van de reparatiegemeenschap - Account aanmaken

Inleiding

Power buttons notoriously end up inside of devices if too much force is applied. This guide aims to replace the power button into it's desired location.

Wat je nodig hebt

1. Stap 1 Case
  Place the Google Chromecast face down (with text not showing) on a flat surface.
  
  Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
2. Stap 2
  Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
4. Stap 3
  Remove the circuit board, lifting from the HDMI port.
  
  The power button may become dislodged.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
5. Stap 4
  Pry the plastic clamp from the heatsink.
  
  Do not pry too hard to avoid breaking the clamp.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
6. Stap 5
  Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.
  
  The adhesive's strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
1. Stap 6 Power Button
  Press the plastic button from the outside of the port, pushing it inward if it is stuck.
  Bewerken
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024