Inleiding

This guide shows how to remove the LCD screen from the camera. You may have to replace a broken or shattered screen.

Onderdelen

Geen onderdelen nodig.

Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
  • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

Voeg opmerking toe

Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
  • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

Voeg opmerking toe

Separate the front case from the body of the camera.
  • Separate the front case from the body of the camera.

Voeg opmerking toe

Mac RAM Kits
Versnel je Mac. Breid zijn geheugen uit.
Mac RAM Kits
Haal meer megabytes uit je Mac.
Separate the back case from the body of the camera.
  • Separate the back case from the body of the camera.

Voeg opmerking toe

Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up. Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up. Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up.
  • Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up.

Voeg opmerking toe

Before removing the side metal bracket, first remove the attached strap knob by twisting it off.
  • Before removing the side metal bracket, first remove the attached strap knob by twisting it off.

  • Then, remove the side metal bracket by inserting the plastic opening tool under the bracket and pulling up.

Voeg opmerking toe

Using the plastic opening tool, pry up the LCD screen starting at one of the corners. Insert the tool under one of the corners and lift up.
  • Using the plastic opening tool, pry up the LCD screen starting at one of the corners. Insert the tool under one of the corners and lift up.

Voeg opmerking toe

Continue to lift the LCD screen all the way up. Be careful not to rip any wires connecting the LCD screen to the top of the camera.
  • Continue to lift the LCD screen all the way up.

  • Be careful not to rip any wires connecting the LCD screen to the top of the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Laura

Lid sinds: 19-04-12

31 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-45, Regan Spring 2012 Lid van Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 3

Afgelopen 30 Dagen: 11

Altijd: 1,078