Inleiding

This guide shows how to remove the front case from the rest of the camera. You may have to do this to replace a damaged front cover or to access the inner parts of the camera.

Onderdelen

Geen onderdelen nodig.

Locate 12 screws. Four on the left, four on the right, and four on the bottom.
  • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

Voeg opmerking toe

Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
  • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

Voeg opmerking toe

  • Separate the front case from the body of the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Patrick Stalwick

Lid sinds: 18-04-12

112 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 9-45, Regan Spring 2012 Lid van Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 284