Repareer je spullen Gemeenschap Winkel

Canon Selphy CP910 LCD Screen Replacement

Inleiding

The Canon Selphy CP910 is used to print pictures from a camera and WiFi connection. If there are any issues with the LCD screen of the printer, it may be necessary to remove it. For information regarding troubleshooting issues with the Canon Selphy CP910, go to Canon Selphy CP910 Troubleshooting.

Contact the manufacturer for inquiries about receiving parts of the Canon Selphy CP910.

Wat je nodig hebt

  1. Canon Selphy CP910 LCD Screen Replacement, Disassembling Canon Selphy CP910 Body: stap 1, afbeelding 1 van 2 Canon Selphy CP910 LCD Screen Replacement, Disassembling Canon Selphy CP910 Body: stap 1, afbeelding 2 van 2

    • Turn the printer over.

    • Use the PH1 screw bit to remove the three 8 mm screws in the middle of the back plate.

    • Keep track of these screws because you will need them to reassemble the printer.

    Bewerken

  2. Canon Selphy CP910 LCD Screen Replacement: stap 2, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 2, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 2, afbeelding 3 van 3

    • Loosen up the four 10 mm corner screws.

    • A screwdriver with a long shaft approximately 7mm in diameter will make it easier to reach these screws.

    Bewerken

  3. Canon Selphy CP910 LCD Screen Replacement: stap 3, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 3, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 3, afbeelding 3 van 3

    • Turn the device around and remove the "open" lid.

    • This lid needs to be removed in order to take the printer apart.

    • Gently bend the lid and remove it from its hinges.

    Bewerken

  5. Canon Selphy CP910 LCD Screen Replacement: stap 4, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 4, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 4, afbeelding 3 van 3

    • Turn the device back over and lift the top panel up.

    • Disconnect the ribbon cables leading to the LCD screen.

    • Pull the top panel off.

    Bewerken

  6. Canon Selphy CP910 LCD Screen Replacement, LCD Screen: stap 5, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement, LCD Screen: stap 5, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement, LCD Screen: stap 5, afbeelding 3 van 3

    • Once you detach the top, turn the device around.

    • Use the PH0 screw bit to remove the five [size] screws.

    Bewerken

  7. Canon Selphy CP910 LCD Screen Replacement: stap 6, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 6, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 6, afbeelding 3 van 3

    • Push out the LCD screen from the main case.

    • The screen should slide out freely.

    Bewerken

  8. Canon Selphy CP910 LCD Screen Replacement: stap 7, afbeelding 1 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 7, afbeelding 2 van 3 Canon Selphy CP910 LCD Screen Replacement: stap 7, afbeelding 3 van 3

    • Pull out the rod connecting the LCD screen to the frame.

    • Insert the new screen.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Christie Peralta

Lid sinds: 02/01/16

700 Reputatie

5 handleidingen geschreven

Medailles: 15

+12 andere badges

Team

UW Tacoma, Team 1-6, Rose Winter 2016 Lid van UW Tacoma, Team 1-6, Rose Winter 2016

UWT-ROSE-W16S1G6

4 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 19

Altijd: 1,183